¡Disponible sólo en Internet!

NUX NSS-5 SOLID STUDIO Pedal simulador de cabina para guitarra

Nuevo producto

Pedal para simular la etapa de potencia de amplificadores (opciones de tubos EL34, 6V6 y EL84), caja de altavoces (8 tipos para elegir) y un micrófono (con emulaciones de los modelos más populares del mercado). Nos permite combinar el Solid Studio con un preamplificador y completarlo con la emulación de etapa de potencia, o usarlo con amplificadores completos, que ya disponen de su propia etapa

Más detalles

Este producto ya no está disponible

Observa los videos

$ 537.900 impuestos inc.


Hasta hace no demasiado, el uso de respuestas por impulsos era algo exclusivo de los entornos profesionales y del aficionado avanzado. Ahora ya no sabemos qué pensar, ya que el gran éxito que está teniendo su implementación en nuevos productos de marcas de pedales nos hace pensar que se está convirtiendo en algo más popular de lo parecía que estaba destinado a ser. 

Requiere fuente de alimentación de 9V (No incluida). Rango profesional, ideal para estudios de grabación y producción musical de alta calidad. 


NUX Solid Studio was created and designed to address: limited gear availability, and the cumbersome transport reality of physical amp/speaker cabinets.

NUX is proud to introduce the new Verdugo series Solid Studio IR & Power Amp simulator, a pedal version of the most classic amp/cabinet scenarios including microphones and power amp tubes. Over many years of research, Solid Studio was specifically developed to fill the essential needs of discerning musicians and sound technicians, including the art of mic-ing instrument amplifiers on stage or in the studio. Solid Studio provides ease-of-use, reliability, versatility, and, above all, incredible audio quality.

Virtual mic-ing is achieved by choosing 1 cabinet and 1 microphone, and fine-tuning the position of the microphone using the mic position switch.  Plus, you can add the tube sound by engaging the power amp simulation. 

Solid Studio comes with 8 speaker cabinet simulations. All the cabinet models inside the Solid Studio are sounds great as original as the way it feels.
And there are 8 microphone models you can combine with any cabinets. Also, you can adjust microphone position for fine tuning.

Solid Studio Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.

All the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD.
  • Jazz 120 is a registered trademark of Roland Corporation
  • Deluxe Reverb 112, Bassman 410 and Twin Reverb 212, is a registered trademark of Fender Musical Instruments Corporation
  • AC30 212 is a registered trademark of Vox Amplification Ltd
  • Greenback and Vintage 30 is a registered trademark of Celestion
  • MD421 is a registered trademark of Sennheiser Electronic GmbH & Co
  • SM57 and Beta 42 is a registered trademark of Shure Incorporated
  • U87 is a registered trademark of Georg Neumann GmbH
  • R121 and R122 is a registered trademark of Royer Labs
  • AKG C414 and AKG C3000 is a registered trademark of Harman International Industries

NUX Solid Studio has 6.35mm mono input with input signal level toggle switch (-10dB / +4dB). And it has 3 outputs; simulation dedicated STEREO OUTPUT and DI OUT, and a bypass "THRU" output.

Connection Tips

Solid Studio offers a variety of connection ways and it can fit any desired spot on your signal chain to use all the cabinet/mic simulations efficient.

Gig Saver
- You can place the Solid Studio at the end of your pedal board, and you can send the simulated sound to the mixer while you can send your original signal to the amp. This connection is very useful if the stage (or studio) and cabinet mic-ing conditions are not good enough. 

Silent Connection
- Direct connection to mixer or audio interface for recording. It gives more alternative cabinet options to record your favorite amplifier sound, especially if there is no chance to use any loudspeaker.

Advanced Connection
- You can place the Solid Studio between the amp and the cabinet. You can send the loud signal from the amp's cabinet output to the Solid Studio, and you can send the original signal to the cabinet, simulated signal to the mixer/audio interface. 


When you use the advanced connection method:
  • The amplifier's speaker output must be connected to the Solid Studio's input by a SPEAKER CABLE
  • The Solid Studio's THRU output must be connected to the speaker cabinet's input by a SPEAKER CABLE
  • The Solid Studio's output mode must be selected as SPK (SPEAKER) 



Impulse Response (IR) Loader & IR Capture
You can easily emulate the sound of any guitar cabinet by loading different IRs (Impulse responses) to NUX Solid Studio. The internet is a huge library and you can find many different IR's
 (both paid and free). And you can add into Solid Studio to use it whenever you want. (Currently, we are developing a software for Solid Studio and there will be more information soon)

Technically, the Most Realistic IR Loader: Solid Studio

The Solid Studio’s IR resolution is 2048 samples and 46ms. Talking about numbers, IR quality can be measured with the sample resolution and it’s scaled with milliseconds. On this calculation, 1024 samples equal to 20ms capturing length and this is the common quality standard in the market right now. And one of the well-known profiler gear offers 2048 samples / 40ms length.

The highest resolution quality limit of the IR is 50ms, yes, that’s not a realistic sound. It is the REAL sound.

What makes the Solid Studio unique? It offers 46ms length which means it can perfectly bring back all the frequencies. Comparing the length, 20ms is already enough to capture a sound profile with an efficient result but it’s not enough to catch the lower frequencies. That’s why the high-quality gears usually provide the 40ms length - it means higher resolution and better quality.

(If you are interested to read more advanced details click here

Considering all the process on the signal from your guitar to your ear, Solid Studio delivers the signal in a blink of an eye with the greatest result. Because of Solid Studio’s high-quality processor and perfect algorithm, high quality IR gear comes with the fastest speed. As a result; signal latency from input to output is less than 1ms

Many of the IR equipment’s signal latency is around 2ms, also each pedal on the signal chain also increases the signal path and that increases the latency too. For example, the fastest multi-effect pedal needs 2ms to deliver the sound, if you use an IR equipment with the multi-effect pedal, the latency will be 4ms and a guitar player can ~barely~ feel that. If it’s more than 5ms it’s obviously slow and it’s not able to play. 


Los clientes que compraron este producto también han comprado...

8 productos más en la misma categoría: